• TEMPERATURE CONTROL UNITS FOR THERMAL OIL OR WATER

• The Regloplas product range includes powerful Temperature Control Units for water or thermal oil with standard and special equipment, special versions, different regulation systems and a wide range of accessories.

• The SMART line
With four models, Regloplas has with the Smart line a wide range of devices with an incomparable price/performance ratio.
Every Smart device impresses with its outstanding technological performance and high quality according to the Regloplas standard: 90Smart, 150Smart, P140Smart, 300Smart.

• The line UP TO 150°C: 90S, 90M, 90XL, 90XXL, 150S, 150.
Tempering of injection molding molds, extruders, cylinders and other applications.

Key word benefits: Lowest scrap rate from start of production, better mold filling behavior, tight tolerances, minimal warpage and shrinkage, and better part surface. In short: consistently high-quality production.

In the manufacture of injection molded parts, scrap can be reduced by up to 24% with the correct mold temperature. This provides an improvement in profitability of up to 20% (research from the Technical University of Aachen).


• Pressurized water appliances up to 180 °C: P120XXL, P140S, P140M, P141XL, P140XXL, P160S, P160M, P160MD, P161XL, P160XXL, P180M, P180MD.

Tempering of injection molds and die casting molds, extruders, kneaders, cylinders and other applications. Optimum heat transmission has a direct influence on the productivity of your production facility.
Pressurized water appliances are recommended where the advantages of water as a thermal fluid play a decisive role, even above 90 °C. Patented low-scale cooling system "SK".

• Oil appliances up to 350 °C: 300S, 300L, 300LD, 350L.

Tempering of die casting molds, extruders, mixers, cylinders,
deposits and other applications. Your advantages in words and figures!
In the manufacture of die-cast parts, Regloplas tempering units provide a
scrap reduction of up to 80%, increased mold life by two to three times, and reduced heating time of up to 30%.

•WATER COOLERS

Our coolers provide effective mold cooling in the industry
plastic, extruders, die casting machines, reactors, cylinders and other applications. Air and water cooled versions up to 60 kW are part of our standard delivery program.


• Air cooled condenser: RC2E7, RC2E11, RC2E20, RC2E30Z, RC2E40Z, RC2E60Z.
Water chillers with air-cooled condenser and R407C refrigerant for effective mold cooling in the plastics and die-casting industry,
autoclaves, cylinders and other consumers.


Water cooled condenser: R407C, RCWE7, RCWE13, RCWE20, RCWE25, RCWE45, RCWE55.
Water chillers with water-cooled condenser and refrigerant.